Table of Contents
Advertisement
Before Requesting Service
Check the following points once again if you are having trouble with your unit.
Power
No power...
Power turns itself
off...
Monitor
No picture or sound...
Poor picture with
normal sound...
Poor sound with
normal picture...
Poor TV reception...
No color or poor
color...
Ghost (multiple)
images...
TV programs cannot
be watched...
Remote Control Correction
Unit cannot be
controlled...
ACTION, SELECT,
SET POWER, etc.
buttons cannot be
selected...
50
50
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Correction
• Completely insert Power Plug into an AC outlet.
• Set POWER button to ON.
• Auto power-off (shut off) occurs after about 5 min. in DVD mode with
no operation, or if there is no broadcast signal in TV mode. Turn the
power back on. (P. 17, 26)
Correction
• Make sure your antenna system (TV or CABLE), is correctly set.
(P. 10)
• Completely insert Power Plug into an AC outlet.
• Set POWER button to ON.
• Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the
SET UP Video Adjustment. (P. 33)
• Adjust VOLUME control. (P. 18)
• Adjust SHARPNESS and PICTURE controls in the SET UP Video
Adjustment. (P. 33)
• Adjust TINT and COLOR controls in the SET UP Video Adjustment.
(P. 33)
• Install a directional antenna.
• Make sure the selected channel is in unit's memory. (P. 12)
• Aim Remote directly at the remote sensor on the unit. (P. 9)
• Avoid any object blocking signal path.
• Inspect the remote batteries. (P. 4)
• Exposing unit remote sensor to direct fl uorescent or outdoor light may
cause signal interference.
• Press FM/TV for TV mode. (P. 18)
• Press DVD for DVD mode. (P. 16)
• Press FM/TV for FM mode. (P. 24)
• Check remote batteries.
Advertisement
Table of Contents
