Vivitar DVR 850HDV3 User Manual page 26

Underwater

Table of Contents

Image Sharpness Menu

You can set the level of sharpness in the images taken with your camcorder. The sharpness level

dictates if the edges of objects in the image are more or less distinct.

1) Press the OK button to open the menus for the current mode.

2) Press the LEFT or RIGHT button to select the 'Image Sharpness' menu.

3) Press the UP or DOWN button to highlight the desired menu selection.

4) Press the OK button to confirm and select the highlighted menu option.

5) A

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the DV button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camcorder until you manually change the setting

or restore the camcorder's default factory settings.

Light Exposure Menu

The Light Exposure setting helps you control the amount of light that enters your camcorder's lens.

This setting should be adjusted when the environment is lighter or darker than normal.

When the environment has more light than is needed, reduce the exposure setting (by using the

negative - count) to reduce the amount of light allowed into the lens by your camcorder.

If the environment has less light (darker) than is needed, increase the exposure setting (by using the

positive + count) to increase the amount of light allowed into the lens by your camcorder.