4.3.9 Quick Dial Number Set (009)
You can store up to eight Quick Dial numbers (Quick Dial 1-8) which are commonly used by any
extension user in the system.
Default: All location numbers: Not Stored
0
0
9
Dial 009.
•
The dialling codes (0-9,
If the PAUSE button is not provided on your PT, press the PROGRAM button to enter a
pause (pausing time).
•
Before programming this programme, a feature number for each location should be
programmed by System Programming.
User Manual
location no.
NEXT
Press NEXT.
Enter location
number (1-8).
, #) and the following buttons can be used for storing the number.
FLASH: hook flash
PAUSE: pausing time (dialling delay)
CONF: "-" (hyphen)
INTERCOM: for Secret Dialling
#: for changing the dialling mode (from Pulse to Tone)
Customising Your Phone & System
desired no.
Enter desired number
Press STORE.
(max. 24 digits).
To continue
NEXT
PREV
OR
Press NEXT. Press PREV.
SELECT
Press SELECT.
To end
STORE
END
Press END.
251