Casio 5455 Operation Manual page 16

Q4
The hands suddenly start moving at
high speed.
This is due to one of the reasons below, and
does not indicate malfunction. Simply wait
until normal hand movement resumes.
The watch is recovering from a power
●
saving state.
Power Saving Function
l
The hands are moving to their new positions
●
following a GPS signal or time calibration
signal receive operation.
Time Adjustment (GPS, Time Calibration
l
Signal)
Q5
Hands are stopped and buttons do
not work.
The watch is in the charge recovery mode.
Wait until the recovery process is complete
(for about 15 minutes). The watch will recover
more quickly if you place it in a brightly lit
location.
Q6
Why is the current time indicated by
the watch is off by a large amount of
time (nine hours, three hours and 15
minutes, etc.)?
The city (time zone) setting is not correct.
Select the correct setting.
Acquiring GPS Position Information
l
Manually
Selecting a Time Zone
l
Q7
The current time indicated by the
watch is off by one hour or 30 minutes
The summer time setting is not correct. Select
the correct setting.
Acquiring GPS Position Information
l
Manually
Selecting a Time Zone
l
Q8
Hands and/or the day indicator is out
of alignment.
Strong magnetism or impact may cause the
hands of the watch to go out of alignment.
Correct hand position alignment.
Adjusting Hand and Day Indicator
l
Alignment
Operation Guide 5455
Crown Operations
Q1
Nothing happens when I rotate the
crown.
If you do not perform any operation for about
two minutes after pulling out the crown
(approximately 30 minutes in the case of hand
and day indicator alignment operations),
crown operations will automatically become
disabled. Push the crown back in to its normal
position and then pull it out again.
Using the Crown
l
16