Specifications; Amplifier Section; Video Section; Am Tuner Section - Teac AG-D8800 Service Manual

AG-D8800

AMPLIFIER Section

Output Power:
Surround Output Power
Total Harmonic Distortion:
Audio Input Sensitivity/Impedance:
Output Level / Impedance (TAPE REC):
Frequency Response:
Signal -to-Noise Ratio
Tone Control:
Digital Audio Section
Sampling Frequency:
Digital Input Level:

Video Section

Output Level:
Jacks:
FM Tuner Section
(Without notes 100.1 MHz, 65 dBf)
Tuning Range:
Total Harmonic Distortion (1 kHz):
Frequency Response:
Stereo Separation (1 kHz):
Signal-to- Noise Ratio:

AM Tuner Section

Tuning Range:
Usable Sensitivity :
Total Harmonic Distortion :
Signal -to-Noise Ratio :
GENERAL
Power Requirements:
Power Consumption:
AC Outlets(expect Australia model, total 100 W max):
Dimension (W x H x D ):
Weight:
Standard Accessories:
AM Loop Antenna x 1
FM (T) Type Antenna x 1
FM Matching Transformer x 1
Remote Control Unit (RC-1040 or RC-1042) x1
BATTERY (AAA, R03, UM-4) x 2
Instruction Booklet x 1
* LINE means CD, TAPE,VIDEO
Design and specifications are subject to change without notice.
Weight and dimensions are approximate.
Illustrations may differ slightly from production model.

1 SPECIFICATIONS

100+100 W (Stereo 0.7% THD,40Hz to 20 kHz,6 ohms)
125 W per channel (0.7% THD, 1kHz, 6 ohms, only one channel driven)
BASS: +/- 10 dB at 100 Hz, TREBLE: +/- 10 dB at 10 kHz
120 W + 120 W ( 6 ohms, JEITA)
150 W per channel (6 ohms, JEITA)
0.09% (at 100 W, 1kHz, 6 ohms)
*LINE: 200 mV/47 k ohms
200 mV/22 k ohms
*LINE: 20 Hz - 50 kHz, +0/-3 dB
*LINE: 92 dB (IHF-A)
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
COAXIAL ( 75 ohms): 0.5 Vp-p
1 Vp-p (75 ohms)
87.5 MHz - 108.0 MHz (50 kHz steps)
Mono: 0.5% , Stereo: 0.8%
30 Hz - 15 kHz, +/- 3dB
Mono: 70 dB / Stereo: 65 dB
522 kHz - 1,611 kHz (9 kHz steps)
1.5 % at 100 dB/m
40 dB at 100 dB/m
AC 230V ,50 Hz
200 W (STANDBY: 3 W or less)
Switched x 1
440 x 141 x 330 mm
RCA Jack
42 dB
500 uV/m
9.9 kg