Panasonic DBS 824 Manual page 105

Call Park
2. Dial "75."
To retrieve a parked call:
1. Pick up the handset.
2. Dial "76."
3. Dial the number of the extension that parked the call.
Related Programming
• FF1 (System): Attendant Park Hold Recall Timer
• FF1 (System): Extension Park Hold Recall Timer
Considerations
• An alarm tone is issued if a parked call is not released before the Recall
• You cannot park more than one outside line at a time.
• The Attendant Phone cannot use this feature. The Attendant must use the
• The Call Park Recall Timer is similar to the Recall Timer, except that
• You can store "75" on an FF key and use it as a Call Park key. After
3-18
"Park Hold" appears on the display.
The phone issues intercom dial tone.
"CO TALK TRK #XX" (where "XX" is the line number) appears on the
display.
Timer expires (determined by system programming). If this happens, the
user that parked the call can retrieve it by simply picking up the handset. If
no one retrieves the call after the Recall Timer expires, a second alarm will
sound at an attendant phone(s).
Attendant Call Park feature.
when the Call Park Recall Timer is set for "0" a call is recalled
automatically in three minutes.
placing an outside call on hold, press the Call Park key to park the call. The
Call Park LED will light while the call is parked and then go off when the
call is released.
DBS 824-3.0/3.2-700
Key Telephone Features
Revised April 2000