Table of Contents
Advertisement
Section 700 - Operation
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Set Special Day Mode
Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
39.)
You can specify up to 20 special days for the System. For each special day, you can specify up to 5
modes settings.
Operation
To set the Special Day Modes:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the date by month (two characters) and day (two char-
acters) for the Special Day 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key.
9. Enter the start time in hours (two characters) and minutes
(two characters) for mode 1.
Note: To clear an entry or existing data, press the FLASH
key.
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8107-
System Mode displays
1-
Mode Special Day displays
1000
:MMDD
Special Day 01 displays
1001
:HHMM
S Day 01-1 Start displays
93
Advertisement
Table of Contents
