Table of Contents
Advertisement
Chapter 4. User Maintenance
Operation
To set the Day of Week Modes:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 3.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter pattern (0 - no pattern, 1 - pattern 1, 2 - pattern 2, 3 -
pattern 3) for the first Sunday.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key to store the entry.
9. To set additional Day of Week modes, press the volume up
or down key or press the HOLD key to move to the desired
mode.
10. Repeat steps 7-9 until the remaining days in the month are
set.
Note: The entry positions are listed in Table 12 on page
102.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Table 12.
Day of the Month - addresses
ADDRESSES
FOR THESE
DAYS OF THE
WEEK:
Sunday
Monday
102
Action
-- DAY OCCURRENCE --
(e.g., 1st Sunday=address 300; 2nd Sunday=address 307)
1st
2nd
300
307
301
308
DBS 576 (USA), Revised 6/11/98
Result
81-
User MAINT displays
8107-
System Mode displays
3-
D of Week PTN displays
300
:
1st SUN Pattern displays
Next Day of Week mode displays
Desired Day of Week mode displays
3-
D of Week PTN displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
3rd
4th
314
321
315
322
Section 700 - Operation
5th
328
329
576-13-700
Advertisement
Table of Contents
