Panasonic WJ-SX650 Operating Instructions Manual page 43

Reference No. Explanation
15 2005 to 2099: Year
16 1 to 12: Month
17 1 to 31: Day
18 [24-h time format] 0 to 23: Time
[12-h time format] 1 to 12: Time
19 00 to 59: Minute
20 AM, PM: Morning, Afternoon
21 DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DDDD, DD/Mmm/YYYY, Mmm/DD/YYYY: Date Format
22 Japanese, English, French*, Spanish*, German*, Italian*, and Russian*: Language
* In the actual display, these parameters are displayed in their own languages.
23 [24-h] 0:00 to 23:00: Start Time
[12-h] 1:00 AM to 12:00 PM: Start Time
24 Date
25 Way to press keys
A to Z: Click each key while holding down the SHIFT key.
a to z: Click each key.
0 to 9: Click each key.
26 1 to 32: Page
27 Available parameters: 1 to 9999
28 Available parameters: 1 to 999
Note: You can select logical camera numbers that have been set in "System" – "Logical Camera Number".
29 Available parameters: 1 to 256
30 1 to 32: Tour sequence No.
31 Available parameters: 1 to 9999
Note: You can select camera position numbers that have set in "Camera" – "Camera Position".
32 Available parameters: Blank, 1 to 256
33 ON: Activate, OFF: Not activate, --: Not control
34 1 to 30 sec: Dwell
35 1 to 32: Group Sequence No.
36 1 to 32: Monitor No.
37 1 to 99: Priority
38 1 to 30 sec: Dwell Time
39 OFF: Auto reset is OFF.
1 to 10 sec, 20 sec, 30 sec, 1 min, 3 min, 5 min: Alarms are reset after this period.
40 N.O.: Normally Open contact
N.C.: Normally Close contact
41 1 to 256: Terminal Alarm
1 to 999: Camera Alarm, Recorder Alarm, Video Loss
Note: You can select camera numbers that have set in "System" – "Logical Camera Number".
1 to 1024: Serial Alarm
42 When Display Mode is set to SPOT, up to 8 events can be added.
43 1 to 64: Alarm schedule No.
Note: You can select only registered schedules.
OFF: Always Active
44 SPOT: Displays a spot camera image
T-SEQ1 to 32: Activates Tour Sequence 1 to 32.
G-SEQ1 to 32: Activates Group Sequence/Preset 1 to 32.
Note: You can select available events only.
45 1 to 999: Recording Source (LCN)
When an alarm event occurs, a command alarm specifying the LCN of recording source camera is transmit-
ted to the recorder.
Note: Recording follows the settings of command alarm and event recording. Refer to the operating instruc-
tions of recorders.
43