Output signal
Time code (LTC) signal conforming
Output signal level
2 Vp-p±10% (1kΩ terminated)
Output data transfer rate
SMPTE mode: 1/4 to 2x normal play
High-speed transfer mode: 1/4 to
Note
In high-speed transfer mode, electrical characteristics
specified by SMPTE 12M-1999 item 8.6 cannot be
satisfied, because the waveform of the output signal has a
steep slope. It is recommended the use in SMPTE mode to
obtain the characteristics that satisfy the above standards.
Accessory supplied
Operation and Installation Guide (1)
76
Specifications
to the electrical and mechanical
interface characteristics defined by
SMPTE 12M-1999 item 8.6,
excluding item 8.6.3
speed (NTSC/PAL) (standard
setting)
10x normal play speed (NTSC/
PAL)