Sony ixs-6600 Operation Manual page 49

Note
The IKS-V6060SD does not support a 540-Mbps SDTV
SDI signal rate.
IKS-A6061 34 D-sub AES/EBU Output Board
This is an output board that handles 34 AES/EBU audio
signals (balanced). It supports 48-kHz sampling frequency
synchronized with the reference word sync signal.
For the IXS-6700, the number of outputs can be expanded
from 34 to 272, in units of 34.
For the IXS-6600, the number of outputs can be expanded
from 34 to 136, in units of 34.
IKS-A6062 17 BNC AES/EBU Output Board
This is an output board that handles 17 AES/EBU audio
signals (unbalanced). It supports 48-kHz sampling
frequency synchronized with the reference word sync
signal.
For the IXS-6700, the number of outputs can be expanded
from 17 to 136, in units of 17.
For the IXS-6600, the number of outputs can be expanded
from 17 to 68, in units of 17.
IKS-RS6060 7 RS-422 Output Board
This is an output board that handles 7 data (RS-422A). It
only supports a 38.4-kbps signal rate. As the RS-422 input
and output boards are handled as a pair, the input/output
size can be expanded in units of 7 inputs and 7 outputs.
The maximum number of RS-422 ports for the IXS-6700
is 112, and that for the IXS-6600 is 56.
Note
Use the RS-422 Input and Output Boards as a pair. When
the RS-422 boards (IKS-RS6010 Input Board and IKS-
RS6060 Output Board) are to be installed, the slot number
for the input board and that for the output board must be
identical. For example, if the input board is installed in Slot
3 for input boards, the output board must be also installed
in Slot 3 for output boards.
For details, refer to the Installation Manual (supplied).
IKS-TC6060 17 Time Code Output Board
This is an output board that handles 17 time code (LTC)
signals.
For the IXS-6700, the number of inputs can be expanded
from 17 to 136, in units of 17.
For the IXS-6600, the number of inputs can be expanded
from 17 to 68, in units of 17.
This board can be used with any processor board of IKS-
A6050, IKS-V6050M, or IKS-V6050SD.
49
Overview