Operation; Halogen Bulbs - Broan 61000 Series Manual

OPERATION

Controls
The hood is operated using the slide controls
under the front edge of the hood.
The light switch turns the halogen lights on
and off.
The blower on / off switch turns the blower on
to the running speed set by the blower speed
control. The blower must be turned on and off
using this switch.
The blower speed control changes the running speed of the blower. It is infinitely
adjustable from low to high speed.
The pilot lamp lights up whenever the blower is on.

HALOGEN BULBS

This range hood requires two halogen bulbs
(Type T4, 12V, 20W).
To change bulbs:
1. Open the light lens by grasping the tab on
the lens and rotating lens downward.
2. Remove the bulb by pulling sideward (Do not
rotate). CAUTION: BULB MAY BE HOT!
3. Do not touch replacement bulb with bare
hands! Push bulb securely into lamp socket
and snap lens closed.
LIGHT
SWITCH
- 7 -
BLOWER
ON / OFF
BLOWER
SWITCH
SPEED
CONTROL
TAB
LIGHT LENS
PILOT
LAMP