CITROËN Grand C4 Picasso Owner's Handbook Manual page 115

The roller has a moving fl ap to
avoid interference with the second-
row passengers when the seats
are in the "reclined" position.
Position 2
7-seat confi guration; installed be-
hind the third-row seats when these
are folded away. This position con-
ceals objects stowed in the boot
from outside view.
Installing the roller
Reel in the blind, then remove
the roller from its initial position.
Position the roller, with the blind
pull bar uppermost, fl ap down-
ward.
Fold the concertina boards.
Downloaded from www.Manualslib.com
Engage the lug on the left of the
roller in notch C .
Pass the right-hand end above
the third-row armrest.
Engage the lug in notch D .
Pull the seat belt(s) so that they
reel out without locking.
Pull out the blind and engage
the guides into the rails on the
pillars.
Lock the seat(s) in position.
Removing the roller
Push the fl ap towards the seat
backrest.
Lift the concertina board by tak-
ing it at the side, then position it
vertically.
Release the seat by pulling the
strap E .
Push the backrest towards the front.
Proceed in reverse order to in-
stalling.
The roller can only be stored when
the seats are folded away.
You can position the concertina
board vertically to lodge a bulky ob-
ject in the boot well.
manuals search engine
F I T T I N G S
Position 3
7-seat confi guration; stowed behind
the third row seats when these are
folded away.
Installing the roller
Fold the concertina boards.
Position the roller, with the blind
pull bar uppermost, fl ap down-
ward.
Engage the lug on the left of the
roller in notch C .
Pass the right-hand end above
the third-row armrest.
Engage the lug in notch D .
Removing the roller
Proceed in reverse order to in-
stalling.
VI
113