Firmware Update - Onkyo R-N855 Instruction Manual

Firmware Update

The updating function on this unit
This unit has functionality to update the firmware (the
system software) over a network or by the USB port. This
enables us to make improvements to a variety of
operations and to add features. For details about the
updated play features, see below.
http://www.onkyo.com/manual/upd/nap/2.pdf
How to update
There are two methods for updating the firmware: via
network and via USB. The update may take about 5
minutes to complete for either method: via network or via
USB. Furthermore, existing settings are guaranteed
regardless of the method used for update.
0 For the latest information on updates, visit our
company's website. There is no need to update the
firmware on this unit if there is no update available.
0 When performed over the network, it may take even
more time depending on the connection status.
0 During an update, do not
– Disconnect and reconnect any cable or USB
storage device, or perform any operation on the
component such as turn off its power
– Accessing this unit from a PC or smartphone using
an application
Disclaimer: The program and accompanying online
documentation are furnished to you for use at your own
risk.
We will not be liable and you will have no remedy for
damages for any claim of any kind whatsoever
concerning your use of the program or the accompanying
online documentation, regardless of legal theory, and
whether arising in tort or contract.
In no event will we be liable to you or any third party for
any special, indirect, incidental, or consequential
damages of any kind, including, but not limited to,
compensation, reimbursement or damages on account of
the loss of present or prospective profits, loss of data, or
for any other reason whatsoever.
Updating the Firmware via Network
0 Check that the unit is turned on, and the connection to
the Internet is secured.
0 Turn off the controller component (PC etc.) connected
to the network.
0 Stop any playing Internet radio, USB storage device,
or server content.
1. Press MENU on the remote controller to display
"Network" on the display.
2. Press / and ENTER to select "Update" - "via
32
En-
Network
Network" in order.
Update
0 "Update" is not displayed if there are no firmware
updates.
3. Press ENTER to start the firmware update.
0 "Completed" is displayed when the update is
complete.
4. Press Í to switch the unit to standby. The process is
completed and your firmware is updated to the latest
version.
If an error message is displayed : When an error
occurs, " ＊ - ＊＊ Error!" is displayed on the display of
this unit. Check the following:
0 ＊ -01, ＊ -10 : Ethernet cable not found. Connect the
Ethernet cable properly.
0 ＊-02, ＊-03, ＊-04, ＊-05, ＊-06, ＊-11, ＊-13, ＊-14,
＊ -16, ＊ -17, ＊ -18, ＊ -20, ＊ -21 : Internet
connection error. Check the following:
– The router is turned on
– This unit and the router are connected via the
network
Try to disconnect and then connect again the power to
the unit and router. This may solve the problem. If you
are still unable to connect to the Internet, the DNS
server or proxy server may be temporarily down.
Check the service status with your ISP provider.
0 Others : Disconnect then reconnect the power cord,
then repeat from the beginning.
Updating via USB
0 Prepare a 128 MB or larger USB storage device.
FAT16 or FAT32 file system format.
0 Delete any data stored on the USB storage device.
0 Turn off the controller component (PC etc.) connected
to the network.
0 Stop any playing Internet radio, USB storage device,
or server content.
0 Some USB storage devices may take long to load,
may not be loaded correctly, or may not be correctly
fed depending on the device or their content.
0 We will not be liable whatsoever for any loss or
damage of data, or storage failure arising from the use
of the USB storage device with this unit. Thank you for
your understanding.
1. Connect the USB storage device to your PC.
2. Download the firmware file from our company's
website to your PC and unzip.
Firmware files are named in the following way:
ONKHIM ＊＊＊＊ _ ＊＊＊＊＊＊＊＊＊＊＊＊ _ ＊＊＊ .zip
Unzip the file on your PC. The number of unzipped
files and folders varies depending on the model.
3. Copy all unzipped files and folders to the root folder of
the USB storage device.
0 Make sure to copy the unzipped files.
4. Connect the USB storage device to the USB port of
this unit.
0 If you connect a USB hard disk drive to the USB
port of the unit, we recommend that you use its AC
adapter to power it.
0 If the USB storage device has been partitioned,
each section will be treated as an independent
device.
5. Press MENU on the remote controller to display