Storage And Maintenance - Shark NV360 Owner's Manual

Storage and Maintenance
STORE YOUR VACUUM SAFELY
1 Convert your vacuum back to upright vac mode.
2
Rotate the upper quick cord release to its upright
position and coil the power cord loosely around
the two clips. Clip the plug onto the cord to secure.
(Fig. 17)
3 Store the dusting brush and the crevice tool on the
mounts on the accessory holder.
4 Store your vacuum cleaner safely in a cool dry area
where it will not be a hazard, will not get damaged
and will not cause damage to anyone or anything.
NOTE: Empty dust cup after cleaning and prior
to storing. (See "Maintenance" section for
instructions.)
A
To reduce the risk of electric shock, unplug the unit
before performing any cleaning, maintenance, or
troubleshooting checks.
A
Reassemble all parts securely before operating
vacuum.
A
DO NOT operate the vacuum without the filter;
and dust cup in place.
A
DO NOT operate the vacuum with WET filters.
A
IMPORTANT: Make sure all filters are completely
dry before inserting back into vacuum.
A
WARNING: Never insert sharp objects into any
opening to clear an obstruction.
A
IMPORTANT: Damages caused while clearing
or attempting to clear blockages are not covered
under your product's limited warranty.
12
I
8?
TOLL FREE 1 800·798-7398