What You Will Need; Customer's Current Ip Settings - Icom ip100h Quick Manual

Ip advanced radio system over an existing wireless lan

Hide thumbs Also See for ip100h:

Table of Contents

What You Will Need

• 1 IP1000C controller box

• Several IP100H radios

• Access point(s) – Either customer's existing points or supplied by your Icom Dealer

(Linksys access point used in this guide)

• CS-IP100H cloning software, OPC-478UC (USB only) and the OPC2144 adapter

• Computer with IP100H software and USB drivers installed

• One CAT-5 LAN cable for programming the IP1000C controller and access point (if

required)

In this example, we assume the following WLAN Network settings are programmed into the

customer's WLAN Controller/Router prior to setting up the Icom IP Advanced Radio System.

• DHCP Server Enabled. Customer's WLAN controller will assign all IP addresses to all the

Devices on that WLAN network.

Page 2

Icom America, Inc.

12421 Willows Road NE

Kirkland, WA 98034

Table of Contents

Show Quick Links

Table of Contents