Product Service - Panasonic SC-PT464 Operating Instructions Manual

GENERAL
Power supply
Power consumption
Dimensions (WtHtD)
Mass [Weight]
Operating temperature range
Operating humidity range
Power consumption in standby mode

Product Service

1. Damage requiring service—The unit should be serviced by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing
personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire system.
Product information
For product information or assistance with product operation:
Refer to "Customer Services Directory (United States and Puerto Rico)" on page 33.
AC 120 V, 60 Hz
Main unit 125 W
430 mmk63 mmk325 mm
(16 15 / zk2 15 / zk12 25
16 32
Main unit 3.4 kg (7.5 lbs)
0 oC to r40 oC (r32 oF to r104 oF)
35 % to 80 % RH (no condensation)
approx. 0.1 W
Rating with Low-cut filter equipped Amplifier
§6
[Note]
1 Specifications are subject to change without notice.
/ z) Mass and dimensions are approximate.
32
2 Total harmonic distortion is measured by a digital spectrum analyzer.
31