Table of Contents
Advertisement
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
timer,
V
x
clock, press the
button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After connecting the appliance to the mains or after a power
cut, the
symbol and three zeros flash in the display. Set the
0
clock.
Press the
button.
0
1.
The clock in the display shows 12:00. The time symbols light
up and the
N
arrow is next to
Childproof lock
The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
When the heating type and temperature or grill level are
programmed, the childproof lock turns off the heating.
Activating the childproof lock
No cooking time or end time should already be set.
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
Basic settings
Time indicator
™‚
Duration of signal
™ƒ
after the cooking
time or the time set
on the timer has
elapsed
Time until a setting is
™„
applied
* Default setting
No other time function can be programmed.
Press the
0
button for approximately 4 seconds.
1.
The display panel will show the current basic setting for the
time, e.g.
for the Selection
™‚
Set the basic setting using the buttons
2.
Confirm with the
button.
0
3.
The display panel shows the following basic setting. Using
the button
select the levels and using the buttons
0
make the setting.
Press the
button for approximately 4 seconds.
0
4.
All basic settings have been applied.
The basic settings can be changed again at any time.
arrow.
N
cooking time,
end time or
y
arrow is next
N
0
.
‚
ƒ
Selection
Selection
Selection
„
always*
only with
-
the
button
0
approx.
approx.
approx.
10 sec
2 min.*
5 min
approx.
approx.
approx.
2 sec
5 sec.*
10 sec.
.
‚
@
or
A
.
Use the
or
@
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
0
Press the
0
1.
The time symbols light up in the display and the
next to
0
.
Use the
or
@
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Press the
button for approximately four seconds.
h
The display panel shows the
now activated.
Turning off the childproof lock
Press the
h
button for approximately four seconds.
The
symbol on the display panel goes off. The childproof
@
lock is now deactivated.
or
@
A
button to set the clock.
A
button four times.
button to change the clock.
A
symbol. The childproof lock is
@
arrow is
N
17
Advertisement
Table of Contents
