Installation - AEG F55210VI0 User Manual

Problem
There are bluish layers on
glasses and dishes.
The dishes are wet and dull.
9.3 Error codes
Code
E1
E4

10. INSTALLATION

10.1 Assembly
Make sure to position the
appliance with minimum
space of 50mm on both
sides of fully open door.
Keep 5 mm distance between both sides
of the appliance and the cabinet. There
are two possibilities for the cabinet hole
for the appliance.
Possible cause
The rinse aid dosage is too
high.
The detergent can be the
cause.
A programme without a dry-
ing phase has been selec-
ted.
The rinse aid dispenser is
empty.
Meaning
Longer inlet time
Overfilled
Power cord, drain hose and water
1
supply line hole. To facilitate a
proper installation, position the hole
to the right or the the left of the
appliance.
ENGLISH
Possible solution
Set the rinse aid dispenser
to a lower position.
Try a different brand of de-
tergent.
Set a programme with a dry-
ing phase.
Fill the rinse aid dispenser
with rinse aid.
Possible cause
Tap is not open or water in-
take is restricted or water
pressure is too low
Too much inlet water or
some dishwasher element
leaks
100
min.
80
443mm
min.
550 mm
min.
555mm
15