Advanced Setup - Panasonic SA-XR50 Operating Instructions Manual

Advanced setup

You can adjust the settings to match the setup environment and performance of the connected speakers.
Multi control advanced setup settings
Enter Multi
1
control mode
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
(Multi control mode menus
and factory settings á back
cover)
Select
2
"SETUP 2
(ADVANCE
SETUP)".
INPUT SELECTOR INPUT SELECTOR
Switching Entering
SETUP 2
Change the
3
settings.
• To cancel
MULTI CONTROL
PUSH ENTER
To finish settings
1. Press [MULTI CONTROL]
several times to select
"EXIT".
2. Press [INPUT SELECTOR].
22
SPEAKERS
A B
^
8
6.1CH DECODING
VCR 2
VIDEO IN L AUDIO IN R
SPEAKERS
Set the size to suit your speakers.
LARGE:
For speakers that can reproduce a full
sound range, particularly the bass range
below 100 Hz.
SMALL:
For speakers that cannot adequately
reproduce the bass range. This setting is
sufficient for most speakers if you are
using a subwoofer.
NONE:
For speakers you haven't connected
(center or surround).
For the surround back (SUR BACK) and
subwoofer (SUB-WFR), select YES if you
have connected one, or NO if you have not.
DISTANCE
Enter the distance of the front, center and
surround speakers from
position.
By setting the distance between the
speaker's position (except the subwoofer)
and the listeners seating position, the
sound delay time is automatically adjusted
so that sound reaches the listener at the
same time. You can select distances
between 1.0 and 10.0 m at 0.1-meter
intervals.
FILTER
Change the cut-off for bass output from the
front speakers.
If you set the front speakers to "SMALL", the
filter is set to 100 Hz. Raise the cut-off if the
bass from the front
unsatisfactory so that this bass is output
through the subwoofer.
You can raise the cut-off from 100 Hz to
either 150 Hz or 200 Hz.
VOLUME
MULTI CONTROL INPUT SELECTOR
PUSH ENTER
DOWN UP
PHONES
MULTI CONTROL
1. Select.
INPUT SELECTOR INPUT SELECTOR
SPEAKERS
the seating
1. Select.
INPUT SELECTOR INPUT SELECTOR
DISTANCE
1. Select.
INPUT SELECTOR INPUT SELECTOR
speakers is
FILTER
MULTI CONTROL INPUT SELECTOR
PUSH ENTER
2. Select the 3. Change the
speaker. setting.
INPUT SELECTOR INPUT SELECTOR INPUT SELECTOR
FRONT SMALL
FRONT, CENTER, NONE, SMALL, LARGE
SURROUND,
SUR BACK, SUB-WFR
2. Select the 3. Change the
speaker. setting.
INPUT SELECTOR INPUT SELECTOR INPUT SELECTOR
FRONT
1.0 m
FRONT, CENTER,
SURROUND,
SUR BACK
2. Change the
setting.
INPUT SELECTOR INPUT SELECTOR
100
100, 150, 200
INPUT SELECTOR
NO, YES
INPUT SELECTOR
3.0
m
10.0 m