TRENDnet TV-IP512WN User Manual page 54

TV-IP512WN Wireless N Internet Camera Server with 2-way Audio
Add a camera for monitoring
The Add camera menu is presented the first time the IPView Pro 2.0 software is launched. This
menu is used to add cameras to the user interface for monitoring. After the first time running the
software, this menu can be accessed at anytime from the Configuration menus. The Configuration
menus are described in a later section of this chapter. Notice that the IPView Pro 2.0 software has
automatically detected eligible cameras running on the network.
To add a camera to the IPCam user interface, follow these instructions:
1. Check the list of cameras detected by the software. If the camera you want to add does not appear on
the list, click the Refresh button to conduct another search. If it still does not appear, check the IP
address of the camera and click on the Input the location of camera menu tab and skip ahead to step
2.1.
Choose the camera to add
2. Select the camera to add from the list, enter the administrator's user name (ID:) and password, a
preview of the live video display will appear. Click the OK, add this camera button, a confirmation
message informs when the camera is connected and added to the IPView Pro 2.0 monitoring group.
Repeat this procedure for all the cameras being added. Click the Exit button after all the cameras have
been added.
If the camera does not appear listed, click the Input the location of camera tab above the list to
view a new menu. Enter the IP address or the URL (for example, ipcam.ddns.org) of the camera
being added, type the user name and password and click the Preview to verify that a link can be
Enter ID and password
for the camera being
added
54