M.2 Ssd Module Option - HP 828689-002 User Manual

Install the drive.
3.
Determine the status of the drive from the drive LED definitions
4.
page 8).

M.2 SSD module option

To install the component:
Power down the server (on page 12).
1.
Remove the server from the chassis (on page 12).
2.
Place the server on a flat, level work surface.
3.
Locate the M.2 SSD module slots on the system board. For more information, see "Server
4.
components (on page 9)."
Install the M.2 SSD module.
5.
Install the server into the chassis
6.
Power up the server (on page 12).
7.
("Installing a server" on page 16).
("Hot-plug drive LED definitions" on
Hardware options installation 30