Copy; Rec Mode - Yamaha CDR-D651 Owner's Manual

........................................................RECORDING TO A DISC
12
NATURAL SOUND CD RECORDER CDR–D651
POWER
A
DISC
To start recording
1.
Press REC.
This unit enters the record pause mode.
Standby
2.
Select the appropriate input signal to be used
for recording by pressing the INPUT button.
(See page 14 for details.)
3.
Adjust the recording level.
(See page15 for details.)
The recording level can be adjusted when making
digital and analog recordings. However the recording
level cannot be changed when making a CD DIRECT

copy.

4.
Press w/d (w on the remote) to start recording.
5.
Start playing the source.
6.
Press w/d (d on the remote) to pause recording
temporarily.
"Standby" blinks in the display.
7.
To resume recording, press w/d (w or d on the
remote).
8.
Press a to stop recording.
"Wait" blinks in the display while information is being
written to the PMA (Program Memory Area).
9.
Finalize the disc when recording is complete.
See page 21 for the finalization procedure.
10.
Press v (OPEN/CLOSE B on the remote) to
open the disc tray and remove the disc.
11.
Press v (OPEN/CLOSE B on the remote) again
to close the tray.
12.
Press POWER to turn off the power when you
have finished using this unit.
10,11
COPY
DISPLAY A TEXT/TIME DISPLAY B
PHONES LEVEL
MIN MAX
8
4,6,7
CD–R
L
dB –60 –30 –I0 –6 –4 –2 –I 0 OVER
R
9 2
MULTI JOG
INPUT

REC MODE

TRACK NO. PUSH MODE
DISC A DIGITAL ANALOG
FINALIZE ERASE
DIGITAL REC LEVEL
B
DISC
Recordable
ReWritable
ANALOG REC LEVEL
REC MUTE REC
FADE IN/OUT MIN MAX
1
Important
• Do not turn off the power during recording. If the
power is turned off, recorded material may be lost or
the disc may not perform normally.
• If the power is turned off while recording on a CD-R
disc, any material recorded before the information is
written to the PMA (Program Memory Area) will be lost
and further recording on that disc will not be
possible.
• During recording, make sure that this unit is not
subjected to shock or vibration as it may cause skips
or jumps to be included in the recording.
COPY
OPEN/CLOSE B
A
10,11
FADE IN/OUT TRACK NO.
REC MUTE
REC WRITE
1
REC MODE FINALIZE ERASE
9
DISPLAY
A/B INPUT
2
TIME TEXT DIMMER
MENU
EDIT DELETE SET
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ
0 +10
SPACE SYMBOL PROG
REPEAT RANDOM CLEAR
6,7
4,7
A B
8
E-
13