Nikon COOLPIX P7800 User Manual page 139

Problem
• The subject is too close. Try shooting using the
• Incorrect focus mode setting. Check or change the
Camera cannot • The subject is hard to focus on.
focus. • Set AF assist in the setup menu to Auto.
• Subject is not in focus area when the shutter-release
• The focus mode is set to E (manual focus).
• Turn the camera off and then on again.
Colored stripes may appear when shooting subjects
with repeating patterns (such as window blinds); this is
Colored stripes
not a malfunction.
appear in the
The colored stripes will not appear in captured images
monitor when
or recorded movies. However, when using Continuous
shooting.
H: 120 fps or HS 480/4×, the colored stripes may be
seen in the captured images and recorded movies.
• Use the flash.
• Enable vibration reduction.
• Use D (Best Shot Selector) of Continuous in the
Images are
blurred.
• Use a tripod to stabilize the camera when shooting
Bright specks
appear in The flash is reflecting off particles in the air. Set the flash
mode setting to W (off ).
images captured
with flash.
• The flash mode is set to W (off ).
• A shooting mode where the flash cannot fire is
• A function that restricts the flash is enabled.
• The built-in flash does not fire when an external flash
Flash does not
fire. • When shooting using Advanced Wireless Lighting
Cause/Solution
Scene auto selector or Close-up scene mode, or
the close range only/macro close-up focus mode.
setting.
button is pressed halfway.
shooting menu.
(using the self-timer at the same time is more
effective).
selected.
unit (optional) is used.
photography, set the group setting to Group A.
When using the built-in flash as the commander, set
the channel of the remote flash unit to 3 CH.
See the documentation provided with your
Speedlight (external flash unit).
A
40, 41,
64, 65
64, 65
84
99,
E80
34, 73
64, 66
26
–
59
99
73
62
59
59
67
77
E108
E108
F11