Listen To Radio; Tune To Fm Radio Stations; Program Fm Radio Stations Automatically; Program Fm Radio Stations Manually - Philips AZ1 User Manual

7 Listen to radio

Tune to FM radio stations

Note
•
For better reception, fully extend and adjust the
position of the antenna.
1
Press SOURCE repeatedly to select FM
tuner source.
2
Press and hold
starts to change.
» [SEARCH] (search) is displayed.
» The product tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a station manually, press
/ repeatedly until you find better
reception.
Program FM radio stations
automatically
Note
•
You can program a maximum of 30 preset radio
stations.
In FM tuner mode, press and hold
seconds to activate automatic programming.
» [AUTO] (auto) is displayed.
» All available radio stations are stored
automatically, then the first stored
radio station is broadcast.
14 EN
/ until the frequency
for 2
Program FM radio stations
manually
Note
•
To overwrite a programmed radio station, store
another station in its place.
1
Tune to a radio station.
2
Press and hold PROG for 3 seconds to
activate programming.
» [PROG] blinks on the display.
3
Press / to allocate a number to this
radio station, and then press PROG to
confirm.
» The preset number and the frequency
of this radio station are displayed.
4
Repeat steps 1-3 to program more
stations.

Select a preset radio station

In tuner mode, press
number.

Show RDS information

RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon is displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Program service
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Radio text message
» Time
/ to select a preset