Panasonic GP-KS1000E Operating Instructions Manual page 8

@9 This switch is preset at the factory.
Fix this switch to the ON position.
#0 This switch is preset at the factory.
Fix this switch to the OFF position.
on
#1 / #2 Cable Switch
off
These switches are provided for the optional cables.
Set the switches according to the length of the
optional cables as follows:
Cable Switch #1 Cable Switch #2
OFF OFF
ON OFF
OFF ON
ON ON
Note: Make certain switch settings are correct for
the cable length.
If the camera length is incorrect, camera pic-
tures may not be displayed properly.
on
off
on
off
Cable (length)
GP-CA1K/2 (2m)
GP-CA1K/3 (3m)
GP-CA1K/38 (3.8m)
GP-CA1K/10 (10m)
-6-
Camera Head with Optional Lens
#3 Manual Iris Control Ring
This ring is used to adjust the lens iris manually.
#4 Focus Ring
This ring is used to adjust the focus of the picture.
To adjust the focus, loosen the Focus Lock Ring #5
by rotating it clockwise (viewed from the front of the
camera) and turn the Focus Ring until the picture
becomes focused. Secure the Focus Ring by rotat-
ing the Focus Lock Ring #5 counterclockwise.
#5 Focus Lock Ring
This ring is used to secure the Focus Ring #4 .