Before Using - Panasonic UB-5338C Operating Instructions Manual

Before Using

This unit has the following functions concerning
information security. Please use them properly.
■ Operation Password function
It is possible to set a password in order to prevent a
third party from operating the electronic board when the
power turns on or after a certain period of time has
passed.
For information on setting the password, refer to page
27.
The following display appears in the password input
display. Press the Mode Key (
( ) or the Advance Key (
4-digit password.
Note
• Do not forget the Password.
If you forget the Password, call your dealer.
16
), the Set-up Key
) and enter the
■ Screen Erase Announce function
After scanning the screen, the following display appears
to prompt you to erase the text/diagrams on the screen.
When this display appears, erase the written text/
diagrams in order to prevent a third party from seeing
the screen before the written text/diagrams are erased.
Press the Mode Key (
Note
• If this unit is not operated for about 5 minutes, the
screen saver function is activated to prevent burn in,
and the following display appears:
Press any key to cancel this display.
) to cancel this display.