UB-T761
469.5 mm
1
(1 ft. 6
/
in.)
(1 ft. 9
2
Note
•
The dotted line in the illustration represents the outer edge of the elite Panaboard.
3.
Drill 8 holes for the wall mounting plates.
•
Drill holes that are appropriate for the screws you are using.
4.
Install the wall mounting plates using the 4 screws.
•
2 screws are used for each wall mounting plate.
The remaining 4 screws are used after installing the elite Panaboard on the wall.
•
Screws (8 count) are not included with the elite Panaboard. Please purchase screws with a size of M6,
appropriate for your type of wall.
•
Tighten the bolt so that it will not become loose.
•
When drilling the holes and installing the wall mounting plates, follow the procedure in "Wall Types and
Installation Procedures" (page 45).
550 mm
21
/
in.)
32
222.5 mm (8
40 mm (1
784 mm
7
(2 ft. 6
/
8
462 mm
3
(1 ft. 6
/
in.)
16
30 mm (1
44 mm (1
3
/
in.)
4
9
/
in.)
16
in.)
3
/
in.)
16
23
/
in.)
32
9
40 mm (1
/
in.)
16
UB-T781 / UB-T781W:
21
982 mm (3 ft. 2
UB-T761:
7
784 mm (2 ft. 6
/
3
30 mm (1
/
in.)
16
Operating Instructions (For Basic Operations)
Installation Manual
/
in.)
32
in.)
8
1
43