Table of Contents
Advertisement
Remote control operation
Switching the input signal
You can switch the input method manually by
pressing the COMPUTER, WIRELESS
(PT-LB80NTE/PT-LB75NTE only) and VIDEO
buttons. Press the required button several
times or I H to cycle through the input
methods as follows.
You can confirm the selected input method in displayed
graphical input guide on the upper right of the screen.
Highlighted in yellow is selected terminal. See "INPUT
GUIDE" on page 36.
Pressing the COMPUTER button
COMPUTER1
NOTE:
• Only when the COMPUTER2 SELECT is set to INPUT,
you can switch between COMPUTER1 and
COMPUTER2.
• With no signals from COMPUTER terminals, the
computer connecting guidance will be displayed. See
"Computer connection guidance" on page 48.
NOTE:
• Switched signal may be displayed after a short interval.
• If you select an unplugged input method, the input guidance will blink on and off several times.
• See "List of compatible signals" on page 46.
• See "Connections" on page 19.
Capturing an image
Press the FREEZE button to capture the image
and you can see it as a still picture. While the
image is frozen, the audio sound through the
Stopping the projection temporary
You can stop the projection and audio sound
through the projector temporarily for saving
Resetting to the factory default settings
You can reset most of the customised settings
to the factory defaults by pressing the
DEFAULT button of the remote control. Display
the required sub menu or the menu items and press the
DEFAULT button again.
See "Main menu and Sub-menu" on page 30.
E
NGLISH - 26
COMPUTER2
*1. WIRELESS is only for PT-LB80NTE/PT-LB75NTE.
projector will stop. Press the FREEZE button again to
escape and return to the continuing image.
electrical power. Press the AV MUTE button again to
escape.
NOTE:
• Some menu items are not available to reset by pressing
• To reset all the settings to the factory defaults, see
Pressing the WIRELESS button
The WIRELESS button is only for PT-LB80NTE/
PT-LB75NTE.
See CD-ROM contents for more detailed information.
Pressing the VIDEO button
VIDEO
Pressing the INPUT SELECT button on
the projector
COMPUTER1
*1
WIRELESS
the DEFAULT button. Adjust each menu items
manually.
"INITIALIZE ALL" on page 38.
S-VIDEO
COMPUTER2
S-VIDEO
VIDEO
Advertisement
Table of Contents
