Canon EOS M5 User Manual page 27

4
Shoot.
Shooting Still Images
1) Focus.
● Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
● If [Raise the flash] is displayed, press
the [ ] button to raise the flash. It will fire
when shooting. If you prefer not to use
the flash, push it down with your finger,
into the camera.
2) Shoot.
● Press the shutter button all the way down
to shoot. (In low-light conditions, the flash
fires automatically when you have raised
it.)
● Your shot remains displayed on the
screen for about two seconds.
● Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
Recording Movies
1) Start recording.
● Press the movie button. Recording
begins, and [ Rec] is displayed with the
elapsed time.
● Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
● Frames displayed around any detected
faces indicate that they are in focus.
● Once recording begins, take your finger
off the movie button.
2) Finish recording.
● To stop movie recording, press the movie
button again.
● If the camera cannot focus on subjects when you press the
shutter button lightly, an orange AF frame is displayed with [
and no picture is taken if you press the shutter button all the way
down.
● Once recording begins, the display area narrows, and subjects
are enlarged.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wireless Features
],
Setting Menu
Accessories
Appendix
Index
27