Stihl MSE 170 C Instruction Manual page 21

2
Take out the screw (2).
N
1
Line up the tensioning gear (1) and
N
guide bar (3).
2
Insert the screw (2) and tighten it
N
down firmly.
MSE 170 C, MSE 210 C
Disengage the chain brake.
Pull the hand guard towards the
N
front handle until there is an audible
click – the chain brake is
disengaged.
3
Fitting the chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
1
Fit the chain – start at the bar nose.
N
Pay attention to the position of the
tensioning gear and the cutting
edges.
Turn the tensioning gear (1)
N
clockwise as far as stop.
Turn the guide bar so that the
N
tensioning gear is facing you.
2
Fit the chain over the sprocket (2).
N
Push the guide bar over the bar
N
stud (3), the head of the rear bar
stud must engage the slot.
English
3
19