Packing List - Stihl MSE 170 C Instruction Manual

The backcut must be continued on the
opposite side of the trunk.
Ensure that the second cut is at the
same level as the first cut.
Engage the bumper spike behind
N
the hinge and use this as the
rotation point – reposition the
machine as little as possible
Tip of the guide bar must penetrate
N
the wood before the holding wood
(4) – guide machine absolutely
horizontally and swivel as widely as
possible
Make the backcut up to the
N
hinge (5)
Do not cut into the hinge
–
Make the backcut up to the holding
N
wood (6)
Do not cut into the holding wood
–
Immediately before felling the tree, give
out a second warning cry of "timber!".
MSE 170 C, MSE 210 C
Cut through the holding wood at an
N
angle from above with arms fully
extended

Packing List

Remove the machine from the box and
check that you have all the following
items:
Electric chainsaw
–
Guide bar
–
Saw chain
–
Chain scabbard
–
Instruction manual
–
Only models without quick chain
tensioner
Combination wrench
–
English
17