Drainage Connection; Electrical Installation - Asko w6884w eco Operating Instructions Manual

Installation

Drainage connection

The machine is supplied with a drainage hose
attached, which must be connected to a drain.
See the examples below. The height must be
600-900 mm above fl oor level.
The lower position (600 mm) is always
preferable. Ensure that the drainage hose has
no kinks.
600--900 mm
The machine can also be connected to the drain
via a spigot connection. In this case the hose
should also be 600-900 mm above the fl oor.
The internal diameter of the hole should be at
least 18 mm.
• Cut the nipple
• Remove burrs from the hole.
See the illustration.
At least 18 mm

Electrical installation

Connect the machine by plugging it into an
earthed wall socket. The electrical wall socket
must be placed outside of the installation area
to be easily accessible.
CAUTION!
If this appliance is supplied from a cord
extensions set or electrical portable outlet
device, the cord extension ser or electrical
portable outlet device must be positioned so
that it is not subject to splashing or ingress of
moisture.
Connection on delivery
The machine is supplied as 1-Phase, 220-230V,
50-60Hz, heat output 2000W and has a 10A
plug. Any residual current devices must be
type A.
NOTE!
Repairs and maintenance must be carried out
by a qualifi ed professional.
29