Selecting Options - Asko w6884w eco Operating Instructions Manual

Washing

Selecting options

6
You can select options to adjust the
wash programme to suit your own
specifi c requirements. The available options
depend on the selected programme. If the
option is available for the selected programme,
the symbol lights up when you press the button.
The machine will remember the options you
select for each programme (applies to Super
rinse, High water level and Super wash). You
can still change the selected options the next
time you select the same programme.
Temperature
• Select the temperature by pressing the -/+
buttons until the desired temperature is
displayed.
• You can select temperatures between
cold (-) and 90°C. By selecting cold, the
wash temperature will be the same as
the temperature of the water entering the
machine. For Wool/hand wash it is not
possible to select a temperature above 40°C,
when selecting Time program, Synthetics
and Easy Care the maximum temperature is
60 °C.
Spin
• Select the spin speed by pressing the -/+
buttons until the desired spin speed is
displayed.
• You can select speeds between 400 and
1400 rpm, (no spin) or No D (no drain).
The maximum spin speed varies according
to the program selected. The speed is shown
in the display.
16
• , means that the program does not include
a spin cycle and ends by draining.
• No D, No drain means that the program
does not include a spin cycle and ends
with the water from the fi nal rinse still in the
machine. The washing will remain covered
by the water from the fi nal rinse, stopping it
from getting creased. If you have selected
"No drain", once the program has ended you
must select the Spin or Drain program to
drain the water from the machine before you
open the washer door.
Delayed start
When you select Delayed start the machine will
start 1-24 hours after you press the Start button.
This option cannot be used with Time program.
• Select Delayed start by pressing the + button
under the time display. Delayed Start is
shown for three seconds.
• By pressing the -/+ buttons under the time
display you can delay the start in whole
hours up to a maximum of 24 hours. The
symbol for Delayed start lights beside the
number of hours.
• Press Start, and the machine counts down
1 hour at a time and starts after the selected
delay.
If you change your mind and want to cancel
Delayed start, you must press and hold the Stop
button for three seconds.
NOTE!
Remember to press the Start button to start the
program.