Yamaha Crux Owner's Manual page 139

SERVICE2.pmd
Downloaded from www.Manualslib.com
b. Spark Plug
c. Valve Clearance
(If required)
(After matching of the mark on sprocket cam chain with mark on Cylinder
Head Casting and ensuring the Piston at TDC of compression stroke.)
d. Kick Operation
e. Carburetor
f. Drive Chain
g. Fasteners
1. Cylinder Head Bolts
2. Engine Mounting
a) Engine Mounting Front and Stay Front
b) Stay Engine Front and Frame
c) Engine Mounting Rear and Frame
d) Engine Mounting Upper &
Stay Engine Upper
e) Stay Engine Upper and Frame
f) Engine Mounting Front Lower and Frame
3. Front and Rear Silencer Mounting Nut
4. Crown Handle Centre Bolt
3
manuals search engine
PRE-DELIVERY INSPECTION REPORT
: Recommended No. (P-RA7HC - Champion)
Gap 0.9 ±0.2 mm
: (Cold condition)
Inlet 0.08 ~ 0.12 mm
Exhaust 0.10 ~ 0.14 mm
: For free Movement
: • Idle RPM (1300~1500 RPM)
In warmed up condition
• Check for Overflow
: • Alignment
• Slackness (20 ~ 30 mm)
Specified Torque
(Ft-Lb)
14-17
25-29
25-29
25-29
25-29
25-29
25-29
9-12
20-31
10-33
9/24/2005, 8:01 AM