TrekStor SurfTab duo W3 Operating Instruction page 41

You can choose whether to connect a USB-Stick directly to one
of the two USB-A sockets on the keyboard or whether to use a
USB host adapter cable and one of the two Micro-USB sockets
on the tablet itself.
i
NOTE
If you use one of the USB-A sockets on the keyboard, the
tablet must be connected to the keyboard. Do not disconnect
the tablet from the keyboard during the data transfer.
i
NOTE
If you are using a USB-Stick with the USB 3.0 standard, it is
recommended that you use the supplied USB host adapter
cable and the Micro-USB 3.0 socket on the SurfTab itself for
the data transfer. This way, you can benefit from the higher
transfer speed of the USB 3.0 standard.
a) Connect the USB-Stick to your computer and transfer the
required file to the USB-Stick.
b) Remove the USB-Stick from the computer and connect it to
the relevant socket on your tablet.
c) After a brief moment, the USB-Stick is recognised by the
tablet. Open the file browser by tapping the folder symbol
on the task bar.
d) Tap "t pC" on the left in the file browser. All available drives
his
and folders are displayed.
e) Tap the USB-Stick twice to select it. All of the files stored on
the stick are displayed.
f ) Tap the file you want to copy and hold it for approximately 1
second, then release. The context menu opens as a drop-
down window. Tap "C
g) Now tap "t
open the required target folder by tapping twice.
" on the context menu.
opy
pC" again on the left in the file browser and
his
41 EN