Table of Contents
Advertisement
5
Store or dispose of the print cartridge.
¡If you are switching cartridges, store the cartridge
you are removing in the cartridge container.
6
Unwrap the new print cartridge and remove the
print head cap and the protective tape.
Caution:
¡Do not use the removed print head cap and
protective tape again, or the recorded image may
be distorted.
7
Slide the print cartridge straight into the cartridge
holder (A) and press the green lock lever down
completely (B).
¡Be careful not to touch the rollers with the print
head.
¡Make sure the cartridge is pressed against the back
of the holder.
8
Make sure the marks on the lever and the cartridge
holder align and set the paper thickness lever.
¡If you installed a KX-FA150 print cartridge, set the
lever to the left.
If you installed a KX-FA151 color print cartridge, set
the lever to the center.
Caution:
¡Do not move the mechanism that houses the
print cartridge. Attempting to move the print
cartridge holder will damage the unit.
9
Close the lid securely by pushing down on both
sides.
Note:
¡Whenever the unit is idle, the print cartridge holder is in the home position on the right and caps the print
cartridge. If you unplug the unit while it is printing, or if you move the cartridge from the home position, the
cartridge will not be capped and may dry out.
56
Print head cap
Protective tape
Green lock lever
A
Print cartridge
holder
Paper thickness
lever
B
Marks
Advertisement
Table of Contents
