Loading Envelope Dl Envelopes Rrrrrrrrrrrrrrrrr; Using The Envelope Moderrrrrrrrrrrrrrrrrrrrr - Panasonic KX-F160 Operating Instructions Manual

Loading Envelope DL envelopes
When you use Envelope DL or envelopes that are shorter than 8
15 envelopes at a time and use the automatic sheet feeding.
1 Set the paper thickness lever to the right.
2
Pull up the paper rest and set the paper selection
lever to the front.
3 Insert the envelopes (up to 15 envelopes) printing
side up.
¡Align the edge of the envelopes with the right
edge of the paper tray.
¡Adjust the paper guide.
¡The height of the envelopes should not exceed
the limit mark.
Using the envelope mode
If you are not using Windows and your software application
does not have an envelope feature, you can turn on the
unit's envelope mode using the ENVELOPE button.
1. Make sure the unit is on-line.
2. Open the station key panel and press (ENVELOPE).
The display will show:
3. Press (ON\LINE) to set the unit on-line.
To turn the envelope mode off:
1. Open the station key panel and press (ENVELOPE)
when the unit is on-line.
2. Press (ON\LINE) to set the unit back on-line.
ENVELOPE MODE
3
⁄ inch (222 mm) in width, you can load up to
4
Paper
thickness
lever
Right
Paper rest
Paper guide
Paper
selection
lever
Limit mark
UPPER LIMIT
(ON\LINE)
(ENVELOPE)
13