Attaching The Dual Feed Foot - Janome Skyline S9 Instruction Book

z x
w
e
q
c
v
w
w
q

Attaching the Dual Feed Foot

z Attach the dual feed holder to the presser bar.
q Dual feed holder
x Tighten the thumbscrew with your fingers.
Push the dual feed link to engage it with upper feed
drive.
w Dual feed link
e Upper feed drive
c Lower the presser foot lifter. Lower the needle to the
lowest position by turning the handwheel.
v Tighten the thumbscrew securely with the screwdriver.
Detaching and attaching the dual feed foot
Pull the foot toward you to remove it.
Insert the pins of the foot into the slits of the foot holder
and gently push the foot until it snaps into place.
q Pin
w Slit
22