Honda 1998 Odyssey Owner's Manual page 40

Install the anchor plate and
mounting hardware. The hardware is
available for purchase from your
Honda dealer (part number 82410-
SE3-C01).
When installing tether hardware,
make sure the toothed washer is on
the bottom of the bolt. Tighten the
bolt to:
16 lbf.ft (22 N . m, 2.2 kgf.m)
To attache the tether to the child
seat, follow the child seat maker's
instructions.
If you are not sure how to install the
tether, or you need mounting
hardware, contact your Honda dealer.
Canadian Models
Your Honda has attachment points
for a tether-style child seat to be
installed on the second or third seat
as shown.
Protecting Children
Second Seat Installation:
There are three attachment points
available for the seven-passenger
model, and two attachment points
available for the six-passenger model.
To use a tether-style child seat in the
second seat, the third seat must be
stored in the floor recess (see page
60). You will find a U-shaped slit in
the carpeting at each attachment
point. Select the attachment point
you want to use, and pull up the
carpeting at the slit. Attach the
tether strap to the mounting hook
and make sure it is secure.
Driver and Passenger Safety
CONTINUED