Honda 2004 Civic Si Owner's Manual page 56

Parking Brake
U.S. Canada
and Brake
System
Indicator
This indicator has two functions:
1. It comes on when you turn the
ignition switch to ON (II). It is a
reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
2. If it remains lit after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For complete information,
see page .
179
Malfunction Indicator
Lamp
See page 178 .
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicator does not
blink or blinks rapidly, it usually
means one of the turn signal bulbs is
burned out (see page 146
the bulb as soon as possible, since
other drivers cannot see that you are
signaling.
When you turn on the Hazard
Warning button, both turn signal
indicators blink. All turn signals on
the outside of the vehicle should
flash.
Hatch-open Indicator
This indicator comes on if the hatch
is not closed tightly.
Instrument Panel Indicators
''Daytime Running
Lights'' Indicator
Canadian model only
This indicator comes on when you
turn the ignition switch to ON (II)
with the headlight switch off and the
parking brake set. It should go off if
you turn on the headlights or release
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL. There may
also be a problem with the high
). Replace beam headlights.
High Beam Indicator
This indicator comes on with the
high beam headlights. See page
61 for information on the headlight
controls.
On Canadian model, this indicator
comes on with reduced brightness
when the Daytime Running Lights
(DRL) are on (see page
Instruments and Controls
61 ).
53