Honda 2004 Civic Si Owner's Manual page 154

5. Push the bulb holder into the light
assembly until it locks in place.
6. Test the lights to make sure the
new bulb is working.
7. Line up the clips on the interior
trim with the corresponding holes
in the hatch.Push on the trim to
snap it back in place.
Replacing a Side Turn Signal Bulb
BULB
1. Push the front of the side turn
signal assembly toward the rear of
the vehicle until it pops out of the
body.
Turn the socket one-quarter turn
2.
counterclockwise to remove it
from the lens.
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
SOCKET
4. Put the socket back into its hole in
the lens and turn it clockwise until
it locks.
5. Test the lights to make sure the
new bulb is working.
6. Put the side turn signal assembly
back into the body, rear first. Push
on the front edge until it snaps into
place.
Lights
151
Maintenance