Table of Contents
Advertisement
Lights
HOLDING CLIP
2.
Use a flat-tipped screwdriver to
remove the holding clip from the
inner fender.
3.
Pull the inner fender cover back.
236
Maintenance
4.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
5.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
6.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
7.
Test the lights to make sure the
new bulb is working.
8.
Put the inner fender cover in place.
Install the holding clip. Lock it in
place by pushing on the center.
Hide quick links:
Advertisement
Table of Contents
