Block Diagram; Specifications - Panasonic RAMSA WS-AT200 Operating Instructions Manual

BLOCK DIAGRAM

WS-AT200
Phone jack
!
SPEAKON
Connector
@
WS-AT250
Phone jack
!
SPEAKON
Connector
@

SPECIFICATIONS

Type
Input impedance
Power capacity
Sound Pressure Level
Max. Sound Pressure Level
Frequency response
Crossover frequency
Speaker
Woofer
Tweeter
Dispersion
Dimensions
Weight
Finish
Enclosure
Front panel
Standard accessories
• Dimensions and weight indicated are approximate.
• Specifications are subject to change without notice.
• True effective power measured by the test method prescribed by American National Standard EIA (Electronic Industries
Association), RS-426-A (1980).
In this test, the noise signal with a higher frequency power component was used to match the latest program sources.
Tweeter
Protector
Woofer
Protector
WS-AT200
2 Way, Bass-reflex type
300 W (continuous program input)
150 W (RMS)
99 dB [1 W, 1m (3.3 ft)]
121 dB [1m (3.3 ft)]
70 Hz - 18 000 Hz
2400 Hz
30 cm (12") cone speaker
SCWG horn speaker
90 (horizontal), 40 (vertical)
394 (W) x 577 (H) x300 (D) mm [15-1/2" (W) x 22-3/4" (H) x 11-13/16" (D) ]
Eyebolt (M8 x 25) ........................................... 2
Operating Instructions .................................... 1
-9-
HPF
LPF
Bass–reflex type
8
400W (RMS)
—
92 dB [1 W, 1m (3.3 ft)]
118 dB [1m (3.3 ft)]
30 Hz - 1 400 Hz
—
30 cm (12") cone speaker
—
—
15 kg (33.1 lbs.)
Resin molded, Blue black
Punched grille, Blue black
Tweeter
Woofer
Woofer
WS-AT250