Table of Contents
Advertisement
Additional Information About Your Seat Belts
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the belt, pull it out only as
far as needed.
See page
15
for instructions on how
to wear the lap/shoulder belt
properly.
34
Driver and Passenger Safety
Automatic Seat Belt Tensioners
Your Honda has automatic seat belt
tensioners for added protection
during a moderate to severe frontal
collision.
If your airbags inflate, the tensioners
immediately tighten the seat belts to
help hold the occupants in place. The
belts will remain tight until you
unbuckle them in the normal way.
Seat Belt Maintenance
For safety, you should check the
condition of your seat belts regularly.
Pull each belt out fully and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
that the lap/shoulder belts retract
easily. Any belt not in good condition
or not working properly will not
provide good protection and should
be replaced as soon as possible.
Advertisement
Table of Contents
