Table of Contents
Advertisement
Installing a Child Seat
After selecting a proper child seat,
there are three main steps in
installing the seat:
1.
Properly secure the child seat to
the car with a seat belt.
seats must be secured to the car
with the lap part of a lap/shoulder
belt. A child whose seat is not
properly secured to the car can be
endangered in a crash. See page
27
for instructions on how to
secure a forward-facing child seat
in this car.
2.
Make sure the child seat is firmly
After installing a child
secured.
seat, push and pull the seat
forward and from side to side to
verify that it is secure.
To provide security during normal
driving maneuvers as well as during
a collision, we recommend that
parents secure a child seat as firmly
as possible.
All child
However, a child seat does not need
to be ''rock solid.'' It may be difficult
to install a child seat so that it does
not move at all. Some side-to-side or
back-and-forth movement can be
expected and should not reduce the
child seat's effectiveness.
Protecting Children
3.
Secure the child in the child seat.
Make sure the child is properly
strapped in the child seat
according to the child seat maker's
instructions. A child who is not
properly secured in a child seat
can be thrown out of the seat in a
crash and be seriously injured.
Storing a Child Seat
When you are not using a child seat,
either remove it and store it in a safe
place, or make sure it is properly
secured. An unsecured child seat can
be thrown around the car during a
crash or sudden stop and injure
someone.
Driver and Passenger Safety
25
Advertisement
Table of Contents
