Toyota 2006 Tundra Owner's Manual page 249

CAUTION
To avoid accidentally engaging the
cruise control, turn the system off
when it is not in use. Make sure the
"CRUISE" indicator light is off.
'06 TUNDRA_U (L/O 0508)
SETTING THE CRUISING SPEED
The transmission must be in "D" before
you set the cruising speed.
Bring your vehicle to the desired speed,
push the lever down in the "− SET" direc-
tion and release it. This sets the vehicle
at that speed. If the speed is not satisfac-
tory, tap the lever up for a faster speed,
or tap it down for a slower speed. Each
tap changes the set speed by 1.6 km/h
(1.0 mph). You can now take your foot off
the accelerator pedal.
If you need acceleration—for example,
when passing—depress the accelerator
pedal enough for the vehicle to exceed
the set speed. When you release it, the
vehicle will return to the speed set prior
to the acceleration.
CANCELLING THE CRUISE CONTROL
The cruise control may be temporarily
cancelled by the driver or by the system
itself under certain circumstances. Tempo-
rary cancellation allows the set cruising
speed to remain in memory.
The cruise control can be temporarily can-
celled by doing the following:
D
Pulling the lever in the "CANCEL" di-
rection and releasing it
D
Depressing the brake pedal
Under certain circumstances, the cruise
control is temporarily cancelled:
D
When vehicle speed falls below 40
km/h (25 mph)
D
When vehicle stability control is acti-
vated
When vehicle speed drops 16 km/h (10
mph) below the set speed, the cruise con-
trol is cancelled and the set speed is
erased from memory.
2006 TUNDRA from Oct. '06 Prod. (OM34458U)
215