Yamaha 2001 V Star XVS1100AN Owner's Manual page 35

1. Quick fastener (× 2)
2. Mudguard
4. Remove the mudguard by remov-
ing each quick fastener.
INSTRUMENT AND CONTROL FUNCTIONS
1. Spring preload adjusting ring
2. Position indicator
3. Special wrench
5. To increase the spring preload
and thereby harden the suspen-
sion, turn the adjusting ring in di-
rection a. To decrease the spring
preload and thereby soften the
suspension, turn the adjusting ring
in direction b.
NOTE:
@
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
Use the special wrench included in
the owner's tool kit to make the ad-
justment.
3-14
After removal Before installation
1. Quick fastener
2. Pin
CI-01E
Minimum Stan-
Maximum (hard)
(soft) dard
Setting 1 2 3 4
6. Install the mudguard and ignitor
unit panel by installing the quick
fasteners.
NOTE:
@
To install a quick fastener, push the pin
back so that it will protrude from the
fastener head, and then insert the fas-
tener and push the protruding pin in un-
til it is flush with the fastener head.
@
7. Install the rider seat.
3
5 6 7