Interface; Time Code - Panasonic AJ-HPM100P Operating Instructions Manual

INTERFACE

This menu specifies the ID data that will be returned to the controller.
Item
FR SUPER
No. DISP.
0000
0001
0002
202 ID SEL

TIME CODE

This menu sets the time code.
Item
FR SUPER
No. DISP.
0000
0001
500 VITC BLANK
When set to 59.94 Hz Specifies the position where the VITC signal will be inserted.
0000
0006
0010
501 VITC POS-1
When set to 50 Hz
0000
0004
0015
When set to 59.94 Hz Specifies the position where the VITC signal will be inserted.
0000
0008
0010
502 VITC POS-2
When set to 50 Hz
0000
0006
0015
Setting
FR SUPER
No. DISP.
OTHER Specifies the ID data that will be returned to the controller.
DVCPRO 0: OTHER
1: DVCPRO
ORIG
2: ORIG
NOTE:
• Select [OTHER] for ID data for a VTR other than a DVCPRO.
• Select [ORIG] only when specific Panasonic controllers (such as AJ-A850, separately
sold accessory) are connected.
Setting
FR SUPER
No. DISP.
BLANK Specifies whether or not a VITC signal will be output at the positions selected in menu No.
THRU 501 VITC POS-1 and No. 502 VITC POS-2 during playback.
0: VITC signals are not output.
1: VITC signals are output.
NOTE:
• This setting is available only during analog composite output and SD SDI output.
• In EE mode, the input signal is output with the VITC signal.
NOTE:
10L
| | • You cannot select the same line as in menu No. 502 VITC POS-2.
16L • This setting is available only during analog composite output and SD SDI output.
| |
20L
7L
| |
11L
| |
22L
NOTE:
10L
| | • You cannot select the same line as in menu No. 501 VITC POS-1.
18L • This setting is available only during analog composite output and SD SDI output.
| |
20L
7L
| |
13L
| |
22L
* An underlined setting indicates an initial value.
Settings and brief function description
* An underlined setting indicates an initial value.
Settings and brief function description
117
Setup: Item Settings