Wheel - Mercedes-Benz 2013 C-Class W204 Sedan Owner's Manual

Table of Contents

Advertisement

Driving systems
226
The warning vibration occurs earlier if:
you approach the outer lane marking on a
R
bend.
the road has very wide lanes, e.g. a motor-
R
way.
the system recognises solid lane markings.
R
The warning vibration occurs later if:
the road has narrow lanes.
R
you cut the corner on a bend.
R
Lane-correcting brake application
G
WARNING
A lane-correcting brake application cannot
always bring the vehicle back into the original
lane. There is a risk of an accident.
Always steer, brake or accelerate yourself,
especially if Active Lane Keeping Assist warns
you or makes a lane-correcting brake appli-
cation.
G
WARNING
Active Lane Keeping Assist does not detect
traffic conditions or road users. In very rare
cases, the system may make an inappropriate
brake application, e.g. after intentionally driv-
ing over a solid lane marking. There is a risk
of an accident.
An inappropriate brake application may be
interrupted at any time if you steer slightly in
the opposite direction. Always make sure that
there is sufficient distance to the side for
other traffic or obstacles.
If you leave your lane under certain circum-
stances, the vehicle will brake briefly on one
side. This is intended to help you return the
vehicle to the original lane.
This function is available in the range between
60 km/h and 200 km/h.
A lane-correcting brake application can only
be made after driving over a solid, recognis-
able lane marking. Before this, a warning
must have been issued by means of intermit-
tent vibration through the steering wheel. In
addition, a lane with lane markings on both
sides must be recognised. The brake applica-
tion also slightly reduces driving speed.
If a lane-correcting brake application occurs,
the following appears in the multifunction dis-
play:
Example: vehicles with automatic transmission
i
A further lane-correcting brake applica-
tion can only occur after your vehicle has
returned to the original lane.
No lane-correcting brake application occurs
if:
you clearly and actively steer, brake or
R
accelerate.
you cut the corner on a sharp bend.
R
you have switched on the turn signals.
R
a driving safety system intervenes, such as
R
®
®
ESP
, PRE-SAFE
Brake or Active Blind
Spot Assist.
you have adopted a sporty driving style with
R
high cornering speeds or high rates of
acceleration.
on vehicles with a trailer tow hitch, the
R
electrical connection to the trailer has been
correctly established.
®
ESP
is deactivated.
R
the transmission is not in position D.
R
a loss of tyre pressure or a defective tyre
R
has been detected and displayed.

Advertisement

Table of Contents
loading

Table of Contents